Pick Templater Rig if you only need to set up templates and preview them, Templater Pro if you render batches from your own desktop, and Templater Bot if the workflow has to run on its own. If your volume comes in bursts, the QUE Meter lets you pay per output instead of holding a subscription.
That is the short answer. We make Templater, so the rest of this page explains how we think about the choice and where each edition stops, in plain terms, and walks you through four questions you can answer by reading.
The three editions in one sentence each
Our FAQ puts it this way: Rig is for an artist to set up a project, Pro processes batches of jobs, and Bot lets you fully automate the workflow. Everything else follows from those three sentences.
Templater Rig is the artist’s seat. You rig a composition so chosen layers accept outside content, map your data to those layers, and preview how the result looks. On its own, Rig prepares and previews a project, and the Render and Replicate buttons are disabled. That surprises some customers who tried Templater first, because the free trial includes every feature, even the ones exclusive to Bot. There are two ways forward if you buy Rig after the trial and find you need to render. You can add QUE credits in the QUE Meter, and with credits Rig can replicate and render, in effect every feature, until the credits run out. Or you can move to Pro or Bot, the subscription route.
Templater Pro adds Render and Replicate, so one person can process a batch from a desktop. Someone opens the project, checks it, and starts the batch. It suits a producer who turns a spreadsheet into a few hundred videos and watches them finish.
Templater Bot adds Enable Bot, the function that lets the workflow run without a person starting it. This is the edition for a machine that stays on, watches for incoming data and renders when work arrives.
When each edition is the right seat
The Templater documentation lists situations that point to each edition. They are worth reading against your own week.
Choose Rig when swapping content in your project file takes too much time, when you want to prepare a project that a different studio machine running Pro or Bot will render, when you want to build an After Effects project compatible with Pro to sell or distribute as a template, or when you want a perpetual license to combine with pay-as-you-go production using the QUE Meter.
Choose Pro when your clients have a database of customer information and need a quick turnaround on many unique videos, when your studio has several artists working at the same time on different variations of a master composition, or when you bought a Templater-compatible After Effects template and want many unique versions of it quickly from a data source.
Choose Bot when you need an efficient way to create anywhere from 15 to 15,000 unique videos from a data source, when you want to build a video from web form input and run a script to upload it to a server, when you want to fit Templater into an existing automated production pipeline, or when you need a script to run after every render job or after all render jobs finish. Bot checks for incoming data periodically, pulls it in and renders as a background process, or takes data pushed in through a command line interface. Once the After Effects project is prepared, Bot can customize and render it without anyone operating the After Effects interface.
What each edition includes
Some features are the same across all three editions, and a few are not. The edition comparison table in the documentation shows the split.
- In Rig, Pro and Bot: a QUE campaign, a JSON text file, a Google Sheets document, a tab-separated value file or a remote JSON URL feed as a data source, local and cloud-based footage references, layout rules, project-specific batch assets presets, previewing compositions with data, and logging Templater activity to a file.
- In Pro and Bot: batch replicate, batch render, batch render with Adobe Media Encoder, custom output file naming, switching After Effects projects within the data source, and running shell scripts while Templater processes. Rig reaches replicate and render only through QUE credits.
- In Bot only: command-line interface control, versioning After Effects projects as a background process, and processing extremely large data sources.
One practical note from our FAQ for large jobs: Templater breaks a massive workload into manageable batches and queues jobs one after another so it does not overload your system. If you need more videos per hour, you can run several machines with Templater Bot in parallel, which divides the work across devices.
How to decide in four questions
Read the four questions in order. The first two point to an edition, and the last two shape what to look at next.
- What must Templater do for you? If the job is setting up a project and previewing it, nothing past Rig is needed. If the job is rendering batches from a desktop, look at Pro. If the workflow has to run unattended, look at Bot.
- Does the work run with nobody at the machine? If a person starts every batch, Pro fits. If the machine has to watch for incoming data and render on its own, that is Bot, because Enable Bot is the function that removes the person.
- Does your volume come in bursts? Volume that swings from month to month points toward the QUE Meter, where you pay per output with credits instead of holding a subscription. Steady volume points toward a subscription.
- Will several people or computers use Templater? Then different editions may fit different seats. An artist can sit on Rig while a render machine runs Bot.
Four deciding questions
Work through these four questions in order
-
What must Templater do for you?If the job is setting up a project and previewing it, nothing past Rig is needed.
-
Does the work run with nobody at the machine?If a person starts every batch, Pro fits.
-
Does your volume come in bursts?Volume that swings from month to month points toward the QUE Meter, where you pay per output with credits instead of holding a subscription.
-
Will several people or computers use Templater?Different editions may fit different seats.
Before you choose
Check these before picking an edition
- Confirm whether you need to render and replicate, or only set up and preview
- Decide if the workflow must run unattended without anyone starting it
- Estimate whether your monthly output volume is steady or comes in bursts
- Check which data sources you will use (Google Sheets, JSON, tab-separated value file, remote JSON URL feed)
- Identify how many people or machines will need a Templater seat
- Start with the free 30-day trial, which is a fully featured Templater Bot
How the QUE Meter works with Rig
The documentation describes metered usage licensing as a pay-as-you-go model for customized video outputs. It combines three things: a perpetual license for Templater Rig, which lets you map data to dynamic elements in video comps and preview with that data, a free QUE license that gives you access to the QUE Meter, and the ability to buy QUE credits when you are ready to output customized videos. Rig licenses can be Standard or Floating.
Spot check, replicate and render each consume one credit per output. Your credit balance is tracked by the QUE Meter and shows in both Templater and QUE. Without credits, Rig stays what it was at the start of this page: a seat for preparing and previewing, with the Render and Replicate buttons disabled. With credits, Rig can replicate, spot check and render until the credits run out.
A few more things to know before you rely on it:
- The QUE Meter needs Templater 3.7 or later and a licensed edition of Templater.
- You need a QUE Meter account connected to Templater. QUE trial accounts do not offer the QUE Meter, but you can upgrade a trial account by purchasing credits.
- The host machine needs an active internet connection that can reach the que-api.dataclay.com domain. As you produce output, Templater talks to QUE and updates your balance. If you run out of credits and try to produce an output, a reminder message appears.
- Pro and Bot users can choose, project by project, whether to use the QUE Meter.
- If you use the Meter with Templater Bot, the Bot stops and is auto-disabled when credits run out. When you replenish the Meter, you can enable the Bot again and it picks up where it left off. The documentation recommends making sure your balance is enough for a large job before you enable the Bot.
Where the QUE Meter fits
A subscription makes sense when you render steadily. The QUE Meter is for the opposite pattern: you pay for the outputs you make, using credits. A few facts from our own FAQ matter when you weigh it:
- Any active Templater license key, whether Rig, Pro or Bot, can connect to the Meter and draw from one shared pool of credits. That is how several computers can use one bucket.
- The computer must always have an internet connection, because that is how usage is counted. Traditional Pro and Bot subscriptions do not need that constant connection.
- There is a limit of 1,000 credits per Meter account. Once you pass 1,000 outputs in a single month, a QUE subscription is the more affordable option.
- Credits cost the same per credit at any quantity, so buying a larger pack gives no discount.
Paying for output
QUE Meter vs. subscription: key differences
- Internet connection needed?
- QUE MeterAlways required
- SubscriptionNot required
- Monthly output limit
- QUE Meter1,000 credits per account
- SubscriptionNo stated limit
- Best for which volume?
- QUE MeterBursty or low volume
- SubscriptionSteady, high volume
Once you make more than 1,000 outputs in a single month, a QUE subscription becomes the more affordable option.
Read the third point as a rule of thumb for yourself. If you expect to make well under 1,000 outputs in a month, or your months swing a lot, the Meter deserves a look. If you expect to stay well above that every month, a subscription is the plan built for you. Our post introducing the QUE Meter shows how it works in practice.
Adding credits
You can buy credits in Templater, in QUE, or at dataclay.com/credits. Credits are sold in increments of 50, 100, 250 or 500.
From Templater, open the Templater panel in an After Effects project and click the Q button next to the data field to confirm you are connected to your QUE account, authorizing the connection if needed. In the QUE Meter area of the Output section, click the plus icon, choose how many credits to buy in the browser window that appears, and after the purchase click the Reload icon on the right of the Meter.
From QUE, log in, click your account icon at the top of the page, and choose Add Job Credits in the Plan section. That button appears only when you are logged in with a QUE Meter account, not a QUE Solo or QUE Team account. After the purchase, return to Templater and click Reload on the Meter.
Standard and floating licenses
There are two types of license key, Standard (node-locked) and Floating, and the type is set at the time of purchase. They are not interchangeable: a Standard key cannot activate a floating license build of Templater, and the reverse is also true. If you bought the wrong key type, contact support.
A Standard license is allocated to one specific computer. If you get a new computer or have personnel changes, you can deactivate it and reactivate it on another machine from Templater Preferences or from your Dataclay.com profile. It is enough for most users. A floating license moves available activations between client machines automatically. Floating keys do not activate Templater directly. They activate Dataclay License Manager (DataclayLM), software you install and configure separately, and you point the machines running Templater at that licensing server. When After Effects quits, the license returns to the pool, and if a machine disappears DataclayLM releases its license after a time you can configure. This setup is especially useful with virtual machines, where a node-locked license would need to be deactivated and reactivated by hand every time you reboot or spin up a new one.
What four questions do not tell you
Four questions give you a starting point, not a verdict. They do not know your template, your data, or how long one video takes to render on your machine, and those change what you need in practice. They also leave out prices, because prices change and the licensing and pricing pages are the place to check them. Our Templater licensing guide explains how the licenses work, including the difference between a standard license, which is used on one machine at a time, and a floating license, which any number of devices on a network can share one at a time.
If your project is unusual, or you are not sure which edition is right, the FAQ says to contact us, and we mean it. Starting with the free 30-day trial is also a safe way to learn what you need. The trial is a fully featured Templater Bot, and if you buy and it turns out Templater is wrong for you, you can ask for a refund within 30 days.
Where to go next
- Not sure what data to feed Templater? Read 5 data sources you can use with Templater.
- Starting from a spreadsheet? Automate video editing with Google Sheets walks through it.
- Compare every edition side by side on the FAQ page, or look at the Templater page.
- If your data needs a home of its own, see QUE.
The bottom line
Rig sets up and previews, and with QUE credits it can replicate and render until the credits run out. Pro renders batches from a desktop, Bot runs the workflow on its own, and the QUE Meter is the pay-per-output way in for bursty volume. Work through the four questions above and you will have a starting point. If the answer does not feel right, tell us what is unusual about your project and we will help you pick.
Frequently Asked Questions
Which Templater edition do I need?
It depends on what you do with it. Rig is for setting up and previewing a project, Pro is for processing batches from a desktop, and Bot is for a fully automated workflow. Different people in one organization can need different editions.
Can Templater Rig render videos?
On its own, no. Rig prepares and previews a project, and the Render and Replicate buttons are disabled. With QUE credits in the QUE Meter, Rig can replicate and render until the credits run out. Pro and Bot are the subscription route, and Enable Bot is available only in Templater Bot.
Does the free trial include everything?
Yes. The 30-day free trial is a fully featured Templater Bot, which includes functions that Rig on its own does not have, such as Render and Replicate. That is worth knowing before you choose an edition.
What is the QUE Meter?
The QUE Meter lets you pay per output using credits instead of holding a subscription. Any active Templater license key, whether Rig, Pro or Bot, can draw from one shared pool of credits.
Does the QUE Meter need an internet connection?
Yes. A computer using Templater with the Meter must always be connected to the internet so usage can be counted. Traditional Pro and Bot subscriptions do not need that constant connection.
When is a subscription better than the QUE Meter?
There is a limit of 1,000 credits per Meter account. Once you make more than 1,000 outputs in a single month, a QUE subscription becomes the more affordable option.
What happens to a Templater Bot when the QUE Meter runs out of credits?
The Bot stops running and is auto-disabled. When you replenish the QUE Meter, you can enable the Bot again and it picks up where it left off. Check that your balance covers a large job before you enable the Bot.
